Z-Span Tester™
Description
The Z-Span™ manual bench-top tester measures zero span and short span tensile strength with individually loaded handsheet or machine-made paper samples. The Z-Span™ Tester generates individual tensile readings from prepared test strips. The Dial-a-Gap attachment facilitates testing at multiple spans from 0.2 mm to 0.6 mm. The Wet Testing Kit supports sample preparation and testing of re-wet test strips. New features include: Data sent by Ethernet to data logging software, LCD touchscreen control panel and a service mode.
Benefits
Zero span tensile testing remains the benchmark for measuring Fiber Strength. The Z-Span™ Tester conforms to all national and international test methods. This classic tester has been enhanced with new features to make data output more accurate and operation simpler and trouble free.
Bottom-line: Increased accuracy for a classic test.
Features
System Features
- Once loaded, will perform individual zero span and/or short span tensile tests
- Numbers generated are sensitive to changes in Fiber Strength, Length and Bonding (FS-L-B)
- Installation and training support
Hardware Features
- Rugged construction
- Dial-A-Gap
- Wet sample kit
- Jaw and anvil inserts precision-machined from hardened & rust resistant alloy
- Operation and maintenance tool kit
- Operator manual
- LCD touch screen control panel
- Service mode including separate control of: Load, clamp and test. Also senses pressure before and after load regulator
- Measures peak load at break
- Each test is displayed on screen and can be sent via Ethernet to data logging software on any networked PC
Dimensions
American
Download PDF
Skid
Weight – 120 lb
Height – 37 in
Width – 45 in
Depth – 30 in
International
Download PDF
Skid
Weight – 45 kg
Height – 95 cm
Width – 115 cm
Depth – 75 cm
Service Requirements
American
- 110 psi of instrument quality air
- 120V, 60Hz, 5 Amp electrical service
International
- 7.5 Bar of instrument quality air
- 120 V, 50/60 Hz, 5 Amp electrical service